executeToggles()

void executeToggles	(	fl::RxChannel &	rx,
		fl::span< const PinToggle >	toggles,
		int	pin_tx,
		uint32_t	wait_ms )

Execute pin toggles and initialize RX channel for capture.

Reads the current config from the RX channel, sets the TX pin to the initial state, begins capture, and executes the sequence of pin toggles.

Parameters

rx	RX channel to initialize and use for capture
toggles	Sequence of pin state changes to execute
pin_tx	TX pin number to toggle
wait_ms	Unused parameter (kept for API compatibility)

Definition at line 36 of file test.cpp.

                                      {
    const fl::RxChannelConfig& config = rx.config();
 
    // Set pin to initial state before begin()
    pinMode(pin_tx, OUTPUT);
    digitalWrite(pin_tx, config.start_low ? LOW : HIGH);
    fl::delayMicroseconds(100);  // Allow pin to settle
 
    // Initialize RX channel
    if (!rx.begin(config)) {
        FL_ERROR("Failed to initialize RX channel");
        return;
    }
 
    // Execute pin toggles
    for (size_t i = 0; i < toggles.size(); i++) {
        digitalWrite(pin_tx, toggles[i].is_high ? HIGH : LOW);
        fl::delayMicroseconds(toggles[i].delay_us);
    }
}

References fl::RxChannel::begin(), fl::RxChannel::config(), fl::delayMicroseconds(), FL_ERROR, fl::span< T, Extent >::size(), and fl::RxChannelConfig::start_low.

Referenced by loop().

Here is the call graph for this function:

Here is the caller graph for this function: