setup_i2s()

void setup_i2s

(

)

Definition at line 93 of file Esp32S3I2SDemo.ino.

                 {
    // Note, in this case we are using contingious memory for the leds. But this is not required.
    // Each strip can be a different size and the FastLED api will upscale the smaller strips to the largest strip.
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA0, GRB>(
        leds + (0 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA1, GRB>(
        leds + (1 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA2, GRB>(
        leds + (2 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA3, GRB>(
        leds + (3 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA4, GRB>(
        leds + (4 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA5, GRB>(
        leds + (5 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA6, GRB>(
        leds + (6 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA7, GRB>(
        leds + (7 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA8, GRB>(
        leds + (8 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA9, GRB>(
        leds + (9 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA10, GRB>(
        leds + (10 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA11, GRB>(
        leds + (11 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA12, GRB>(
        leds + (12 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA13, GRB>(
        leds + (13 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA14, GRB>(
        leds + (14 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
    FastLED.addLeds<WS2812, EXAMPLE_PIN_NUM_DATA15, GRB>(
        leds + (15 * NUM_LEDS_PER_STRIP), NUM_LEDS_PER_STRIP
    );
}

References EXAMPLE_PIN_NUM_DATA0, EXAMPLE_PIN_NUM_DATA1, EXAMPLE_PIN_NUM_DATA10, EXAMPLE_PIN_NUM_DATA11, EXAMPLE_PIN_NUM_DATA12, EXAMPLE_PIN_NUM_DATA13, EXAMPLE_PIN_NUM_DATA14, EXAMPLE_PIN_NUM_DATA15, EXAMPLE_PIN_NUM_DATA2, EXAMPLE_PIN_NUM_DATA3, EXAMPLE_PIN_NUM_DATA4, EXAMPLE_PIN_NUM_DATA5, EXAMPLE_PIN_NUM_DATA6, EXAMPLE_PIN_NUM_DATA7, EXAMPLE_PIN_NUM_DATA8, EXAMPLE_PIN_NUM_DATA9, FastLED, GRB, leds, and NUM_LEDS_PER_STRIP.

Referenced by setup().

Here is the caller graph for this function: