buildWave10Lut()

Wave10Lut fl::buildWave10Lut

(

const ChipsetTimingConfig &

timing

)

Build a Wave10 LUT from chipset timing parameters.

Computes UART byte patterns that produce correct LED waveforms when transmitted with TX inversion at the derived baud rate.

The 10-bit UART frame is modeled as two 5-pulse LED bit slots:

• Bit A: [START=H] [D0..D3] – START provides leading HIGH edge
• Bit B: [D4..D7] [STOP=L] – STOP provides trailing LOW

For each LED bit value (0 or 1), the HIGH pulse count within its 5-pulse slot is computed from the chipset's T0H/T1H timing.

Parameters

timing

Chipset timing configuration

Returns

Populated Wave10Lut, or all-zero LUT if timing is infeasible

Definition at line 217 of file uart_wave_encoder.cpp.hpp.

                                                                         {
    return buildWave10LutForMaxBaud(timing, kMaxUartBaudRate);
}

References buildWave10LutForMaxBaud(), FL_NO_EXCEPT, and kMaxUartBaudRate.

Here is the call graph for this function: