PlatformConfig.h

Go to the documentation of this file.

// @filter: (platform is esp32)
 
#pragma once
 
#include <FastLED.h>
 
// ============================================================================
// USER CONFIGURATION - Modify these settings for your setup
// ============================================================================

#define NUM_LEDS 60

#define DATA_PIN 2

#define TEST_BRIGHTNESS 64
 
// ============================================================================
// PLATFORM DETECTION
// ============================================================================

inline const char* getPlatformName() {
#if defined(FL_IS_ESP_32C6)
    return "ESP32-C6";
#elif defined(FL_IS_ESP_32S3)
    return "ESP32-S3";
#elif defined(FL_IS_ESP_32C3)
    return "ESP32-C3";
#elif defined(FL_IS_ESP_32C5)
    return "ESP32-C5";
#elif defined(FL_IS_ESP_32H2)
    return "ESP32-H2";
#elif defined(FL_IS_ESP_32P4)
    return "ESP32-P4";
#elif defined(FL_IS_ESP_32DEV)
    return "ESP32 (classic)";
#else
    return "Unknown ESP32";
#endif
}
 
// ============================================================================
// EXPECTED DRIVERS PER PLATFORM
// ============================================================================

inline void getExpectedDrivers(fl::vector<const char*>& expected) {
#if defined(FL_IS_ESP_32C6)
    // ESP32-C6: PARLIO (priority 4), RMT (priority 1), UART (priority 0)
    // Note: SPI disabled on C6 - only 1 SPI host available, RMT5 preferred
    expected.push_back("PARLIO");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32S3)
    // ESP32-S3: SPI (priority 2), RMT (priority 1), I2S (priority -1), UART (priority 0)
    expected.push_back("SPI");
    expected.push_back("RMT");
    expected.push_back("I2S");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32C3)
    // ESP32-C3: SPI (priority 2), RMT (priority 1), UART (priority 0)
    expected.push_back("SPI");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32C5)
    // ESP32-C5: PARLIO (priority 4), RMT (priority 1), UART (priority 0)
    expected.push_back("PARLIO");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32H2)
    // ESP32-H2: PARLIO (priority 4), RMT (priority 1), UART (priority 0)
    expected.push_back("PARLIO");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32P4)
    // ESP32-P4: LCD_RGB (priority 3), PARLIO (priority 4), RMT (priority 1), UART (priority 0)
    expected.push_back("LCD_RGB");
    expected.push_back("PARLIO");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#elif defined(FL_IS_ESP_32DEV)
    // ESP32 (classic): SPI (priority 2), RMT (priority 1), UART (priority 0)
    expected.push_back("SPI");
    expected.push_back("RMT");
    expected.push_back("UART");
 
#else
    // Unknown platform - no expectations set
    (void)expected;  // Suppress unused parameter warning
#endif
}