template<uint8_t DATA_PIN, uint8_t CLOCK_PIN, EOrder RGB_ORDER = RGB, uint32_t SPI_SPEED = DATA_RATE_MHZ(10)>
class P9813Controller< DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_SPEED >
P9813 controller class.
- Template Parameters
-
| DATA_PIN | the data pin for these LEDs |
| CLOCK_PIN | the clock pin for these LEDs |
| RGB_ORDER | the RGB ordering for these LEDs |
| SPI_SPEED | the clock divider used for these LEDs. Set using the DATA_RATE_MHZ / DATA_RATE_KHZ macros. Defaults to DATA_RATE_MHZ(10) |
Definition at line 561 of file chipsets.h.
|
| virtual void | init () |
| | Initialize the LED controller.
|
| |
| virtual void | showPixels (PixelController< RGB_ORDER, 1, 0xFFFFFFFF > &pixels)=0 |
| | Send the LED data to the strip.
|
| |
| int | lanes () |
| | Get the number of lanes of the Controller.
|
| |
| CLEDController & | setRgbw (const Rgbw &arg=RgbwDefault::value()) |
| |
| Rgbw | getRgbw () const |
| |
| | CLEDController () |
| | Create an led controller object, add it to the chain of controllers.
|
| |
| virtual void | clearLeds (int nLeds=-1) |
| | Clear out/zero out the given number of LEDs.
|
| |
| ColorAdjustment | getAdjustmentData (uint8_t brightness) |
| |
| void | showInternal (const struct CRGB *data, int nLeds, uint8_t brightness) |
| |
| void | showColorInternal (const struct CRGB &data, int nLeds, uint8_t brightness) |
| |
| void | showLedsInternal (uint8_t brightness) |
| | Write the data to the LEDs managed by this controller.
|
| |
| void | showColorInternal (const struct CRGB &data, uint8_t brightness) |
| |
| CLEDController * | next () |
| | Get the next controller in the linked list after this one.
|
| |
| CLEDController & | setLeds (CRGB *data, int nLeds) |
| | Set the default array of LEDs to be used by this controller.
|
| |
| void | clearLedDataInternal (int nLeds=-1) |
| | Zero out the LED data managed by this controller.
|
| |
| virtual int | size () |
| | How many LEDs does this controller manage?
|
| |
| CRGB * | leds () |
| | Pointer to the CRGB array for this controller.
|
| |
| CRGB & | operator[] (int x) |
| | Reference to the n'th LED managed by the controller.
|
| |
| CLEDController & | setDither (uint8_t ditherMode=BINARY_DITHER) |
| | Set the dithering mode for this controller to use.
|
| |
| CLEDController & | setScreenMap (const XYMap &map) |
| |
| CLEDController & | setScreenMap (const ScreenMap &map) |
| |
| CLEDController & | setScreenMap (uint16_t width, uint16_t height) |
| |
| uint8_t | getDither () |
| | Get the dithering option currently set for this controller.
|
| |
| virtual void * | beginShowLeds () |
| |
| virtual void | endShowLeds (void *data) |
| |
| CLEDController & | setCorrection (CRGB correction) |
| | The color corrction to use for this controller, expressed as a CRGB object.
|
| |
| CLEDController & | setCorrection (LEDColorCorrection correction) |
| | The color corrction to use for this controller, expressed as a CRGB object.
|
| |
| CRGB | getCorrection () |
| | Get the correction value used by this controller.
|
| |
| CLEDController & | setTemperature (CRGB temperature) |
| | Set the color temperature, aka white point, for this controller.
|
| |
| CLEDController & | setTemperature (ColorTemperature temperature) |
| | Set the color temperature, aka white point, for this controller.
|
| |
| CRGB | getTemperature () |
| | Get the color temperature, aka whipe point, for this controller.
|
| |
| CRGB | getAdjustment (uint8_t scale) |
| | Get the combined brightness/color adjustment for this controller.
|
| |
| virtual uint16_t | getMaxRefreshRate () const |
| | Gets the maximum possible refresh rate of the strip.
|
| |
Inheritance diagram for P9813Controller< DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_SPEED >:
1.11.0 