FxPride2015.ino

This sketch is fully compatible with the FastLED web compiler.

This sketch is fully compatible with the FastLED web compiler. To use it do the following:

1. Install Fastled: pip install fastled
2. cd into this examples page.
3. Run the FastLED web compiler at root: fastled
4. When the compiler is done a web page will open.

// @filter: (memory is large)

 
#include <FastLED.h>
#include "fl/fx/1d/pride2015.h"
#include "fl/math/screenmap.h"
 
 
#define DATA_PIN    3
#define LED_TYPE    WS2811
#define COLOR_ORDER GRB
#define NUM_LEDS    200
#define BRIGHTNESS  255
 
fl::CRGB leds[NUM_LEDS];
fl::Pride2015 pride(NUM_LEDS);
 
void setup() {
  fl::ScreenMap screenMap = fl::ScreenMap::DefaultStrip(NUM_LEDS, 1.5f, 0.8f);
  
  // tell FastLED about the LED strip configuration
  FastLED.addLeds<LED_TYPE,DATA_PIN,COLOR_ORDER>(leds, NUM_LEDS)
    .setCorrection(TypicalLEDStrip)
    .setScreenMap(screenMap)
    .setDither(BRIGHTNESS < 255);
 
  // set master brightness control
  FastLED.setBrightness(BRIGHTNESS);
}
 
void loop() {
  pride.draw(fl::Fx::DrawContext(fl::millis(), leds));
  FastLED.show();  
}