template<
u8 RED_PIN,
u8 GREEN_PIN,
u8 BLUE_PIN>
class fl::AnalogRGBController< RED_PIN, GREEN_PIN, BLUE_PIN >
Drives one non-addressable RGB LED or strip from three PWM pins.
The first CRGB value attached to the controller sets the color of the entire output. FastLED brightness, correction, and temperature adjustments are applied before the PWM duty cycles are written.
Definition at line 18 of file analog.h.
|
| void | init () FL_NO_EXCEPT override |
| | Initialize the LED controller.
|
| |
| | CPixelLEDController () |
| |
| int | lanes () override |
| | Get the number of lanes of the Controller.
|
| |
| virtual void | showPixels (PixelController< RGB_ORDER, 1, 0xFFFFFFFF > &pixels)=0 |
| | Send the LED data to the strip.
|
| |
| | CLEDController () FL_NO_EXCEPT |
| | Create an led controller object, add it to the chain of controllers.
|
| |
| VIRTUAL_IF_NOT_AVR | ~CLEDController () FL_NO_EXCEPT |
| |
| void | addToList () FL_NO_EXCEPT |
| | Add this controller to the linked list.
|
| |
| virtual void * | beginShowLeds (int size) FL_NO_EXCEPT |
| |
| void | bindStaticEmitterProfile (const EmitterProfile *profile) FL_NO_EXCEPT |
| |
| void | clearLedDataInternal (int nLeds=-1) FL_NO_EXCEPT |
| | Zero out the LED data managed by this controller.
|
| |
| VIRTUAL_IF_NOT_AVR void | clearLeds (int nLeds=-1) FL_NO_EXCEPT |
| | Clear out/zero out the given number of LEDs.
|
| |
| CLEDController & | clearWhiteChannel () FL_NO_EXCEPT |
| | Reset this channel to plain 3-channel RGB (clears any RGBW/RGBWW configuration).
|
| |
| const EmitterProfile * | emitterProfile () const FL_NO_EXCEPT |
| |
| virtual void | endShowLeds (void *data) FL_NO_EXCEPT |
| |
| CRGB | getAdjustment (fl::u8 scale) FL_NO_EXCEPT |
| | Get the combined brightness/color adjustment for this controller.
|
| |
| ColorAdjustment | getAdjustmentData (fl::u8 brightness) FL_NO_EXCEPT |
| |
| CRGB | getCorrection () FL_NO_EXCEPT |
| | Get the correction value used by this controller.
|
| |
| fl::u8 | getDither () const FL_NO_EXCEPT |
| | Get the dithering option currently set for this controller.
|
| |
| bool | getEnabled () FL_NO_EXCEPT |
| |
| virtual fl::u16 | getMaxRefreshRate () const FL_NO_EXCEPT |
| | Gets the maximum possible refresh rate of the strip.
|
| |
| Rgbw | getRgbw () const FL_NO_EXCEPT |
| |
| Rgbww | getRgbww () const FL_NO_EXCEPT |
| |
| CRGB | getTemperature () FL_NO_EXCEPT |
| | Get the color temperature, aka white point, for this controller.
|
| |
| bool | isInList () const FL_NO_EXCEPT |
| | Check if this controller is in the linked list.
|
| |
| const CRGB * | leds () const FL_NO_EXCEPT |
| | Const pointer to the CRGB array for this controller.
|
| |
| CRGB * | leds () FL_NO_EXCEPT |
| | Pointer to the CRGB array for this controller.
|
| |
| fl::span< CRGB > | ledsSpan () FL_NO_EXCEPT |
| | Span of LEDs managed by this controller.
|
| |
| const CLEDController * | next () const FL_NO_EXCEPT |
| | Get the next controller in the linked list after this one (const version).
|
| |
| CLEDController * | next () FL_NO_EXCEPT |
| | Get the next controller in the linked list after this one.
|
| |
| CRGB & | operator[] (int x) FL_NO_EXCEPT |
| | Reference to the n'th LED managed by the controller.
|
| |
| void | removeFromDrawList () FL_NO_EXCEPT |
| | Remove this controller from the draw list.
|
| |
| CLEDController & | setCorrection (CRGB correction) FL_NO_EXCEPT |
| | The color corrction to use for this controller, expressed as a CRGB object.
|
| |
| CLEDController & | setCorrection (LEDColorCorrection correction) FL_NO_EXCEPT |
| | The color corrction to use for this controller, expressed as a CRGB object.
|
| |
| CLEDController & | setDither (fl::u8 ditherMode=BINARY_DITHER) FL_NO_EXCEPT |
| | Set the dithering mode for this controller to use.
|
| |
| void | setEnabled (bool enabled) FL_NO_EXCEPT |
| |
| CLEDController & | setLeds (CRGB *data, int nLeds) FL_NO_EXCEPT |
| | Set the default array of LEDs to be used by this controller.
|
| |
| CLEDController & | setLeds (fl::span< CRGB > leds) FL_NO_EXCEPT |
| | Set the default array of LEDs to be used by this controller (span version)
|
| |
| CLEDController & | setRgbw (const Rgbw &arg=RgbwDefault::value()) FL_NO_EXCEPT |
| |
| CLEDController & | setRgbww (const Rgbww &arg=RgbwwDefault::value()) FL_NO_EXCEPT |
| | Configure this channel for 5-channel RGBWW (RGB + warm-W + cool-W) output.
|
| |
| CLEDController & | setScreenMap (const fl::ScreenMap &map) FL_NO_EXCEPT |
| |
| CLEDController & | setScreenMap (const fl::XYMap &map, float diameter=-1.f) FL_NO_EXCEPT |
| |
| CLEDController & | setScreenMap (fl::u16 width, fl::u16 height, float diameter=-1.f) FL_NO_EXCEPT |
| |
| virtual CLEDController & | setSpiBus (Esp32SpiBus bus) FL_NO_EXCEPT |
| | Select an ESP-IDF SPI host for this clocked controller before init().
|
| |
| CLEDController & | setTemperature (ColorTemperature temperature) FL_NO_EXCEPT |
| | Set the color temperature, aka white point, for this controller.
|
| |
| CLEDController & | setTemperature (CRGB temperature) FL_NO_EXCEPT |
| | Set the color temperature, aka white point, for this controller.
|
| |
| void | showColorInternal (const CRGB &data, fl::u8 brightness) FL_NO_EXCEPT |
| |
| void | showColorInternal (const CRGB &data, int nLeds, fl::u8 brightness) FL_NO_EXCEPT |
| |
| void | showInternal (const CRGB *data, int nLeds, fl::u8 brightness) FL_NO_EXCEPT |
| |
| VIRTUAL_IF_NOT_AVR void | showLeds (fl::u8 brightness) FL_NO_EXCEPT |
| |
| void | showLedsInternal (fl::u8 brightness) FL_NO_EXCEPT |
| | Write the data to the LEDs managed by this controller.
|
| |
| virtual int | size () const FL_NO_EXCEPT |
| | How many LEDs does this controller manage?
|
| |